The following sections outline the assignment of Yamaha 02R96 interface elements to Logic functions.
The following table outlines the DISPLAY ACCESS control assignment:
Control | Assignment |
---|---|
METER | Clears overload LEDs. |
The following table outlines the AUX SELECT controls and their assignments:
Control | Assignment |
---|---|
AUX 1 | Assigns Send 1 level to encoders, and Send 1 to 4 levels to virtual encoders. While held down, the channel strip display shows the current Send 1 destination assignment. |
AUX 2 | Assigns Send 2 level to encoders, and Send 1 to 4 levels to virtual encoders. While held down, the channel strip display shows the current Send 2 destination assignment. |
AUX 3 | Assigns Send 3 level to encoders, and Send 1 to 4 levels to virtual encoders. While held down, the channel strip display shows the current Send 3 destination assignment. |
AUX 4 | Assigns Send 4 level to encoders, and Send 1 to 4 levels to virtual encoders. While held down, the channel strip display shows the current Send 4 destination assignment. |
AUX 5 | Assigns Send 5 level to encoders, and Send 5 to 8 levels to virtual encoders. While held down, the channel strip display shows the current Send 5 destination assignment. |
The following table outlines the ENCODER MODE controls and their assignments:
Control | Assignment |
---|---|
PAN | Assigns pan to encoders; assigns selected channel strip’s pan/surround parameters to virtual encoders. |
AUX | Assigns Send 1 level to encoders, and Send 1 to 4 levels to virtual encoders. While held down, the channel strip display shows the current Send 1 destination assignment. |
The following table outlines the FADER MODE controls and their assignments:
Control | Assignment |
---|---|
FADER | Enables/disables Flip mode. |
AUX/MTRX | Enables/disables Flip mode. |
The following table outlines the EFFECT/PLUG-IN controls and their assignments:
Control | Assignment |
---|---|
Display | Opens or closes the Sample Editor. |
PLUG-INS | Switches SEL buttons and encoder buttons between normal behavior and setting a parameter’s default value. |
CHANNEL INSERTS | Determines mode of channel strip SEL buttons:
|
2 | Switches the display between “track name/parameter name” and “parameter name/parameter value” modes. |
3 | Switches the bypass state of plug-in currently being edited. |
4 | Switches between Plug-in Assign and Plug-in Edit modes. |
Parameter Up & Parameter Down | Plug-in Edit mode: shifts the parameter display to show the next/previous page of parameter controls (usually four) for the selected plug-in. |
Selecting virtual encoders 1 to 4 (Use cursor keys, and then press ENTER button.) | Pan Assignment mode:
Send Assignment mode:
Plug-in Assignment mode:
Plug-in Edit mode:
|
Moving virtual encoders 1 to 4 (Use cursor keys, and then rotate parameter wheel.) | Pan Assignment mode:
Send Assignment mode:
Plug-in Assignment mode:
Plug-in Edit mode:
|
The LCD displays different data, depending on the page selected with the F2, F3, and F4 buttons:
INSERT ASSIGN/EDIT Display mode: Parameter details, plug-in selection, or plug-in parameters. Press F2 to select this mode.
Channel view mode: Encoder values and channel strip display. Press F3 to select this mode.
Level meters view mode: Press F4 to select this mode.
The following assignments are available in all three modes:
Display | Assignment |
---|---|
TIME CODE | Active if counter is displaying SMPTE time code. |
BEATS | Active if counter is displaying bars/beats/divisions/ticks. |
Counter | Displays SMPTE time code or bars/beats/divisions/ticks. |
SELECT ASSIGN | Displays the Encoder assignment as follows: Pan, Snd1 to Snd8, S1As to S8As, In, Out. |
The following table outlines the USER-DEFINED KEY controls and their assignments:
Control | Assignment |
---|---|
Display | While held down, the display shows the automation mode of the channel strips in the current bank selection. |
1 | Switches between the Arrange window and the Mixer. |
2 | Enables/disables the Group Clutch. |
3 | Sets selected channel strip, or channel strip group, to Write automation mode. |
4 | Sets selected channel strip, or channel strip group, to Touch automation mode. |
5 | Sets selected channel strip, or channel strip group, to Latch automation mode. |
6 | Sets selected channel strip, or channel strip group, to Read automation mode. |
8 | Sets selected channel strip, or channel strip group, to Off automation mode. |
9 | Shifts channel strips by one bank to the left. |
10 | Shifts channel strips by one bank to the right. |
11 | Enables/disables volume automation playback and recording. |
12 | Enables/disables mute automation playback and recording. |
13 | Enables/disables pan automation playback and recording. |
14 | Enables/disables send level automation playback and recording. |
16 | Enables/disables plug-in parameter automation playback and recording. |
The following table outlines the channel strip controls and their assignments:
Control | Assignment |
---|---|
Encoder | Adjusts parameter selected in the AUX SELECT section. |
Encoder Select button | Pan selected: sets pan to center position. If EFFECTS/PLUG-INS [PLUG-INS] on Sends 1 to 8 is selected: edits Send Pre/Post, switches Send Mute status, or sets Send Level to default value. Send Assign, Input, or Output: confirms selection. |
AUTO | Cycles through automation modes. When an automation mode button is held down, sets this automation mode. |
SEL | If EFFECTS/PLUG-INS [CHANNEL INSERTS] off: selects channel. If EFFECTS/PLUG-INS [CHANNEL INSERTS] on: chooses channel for plug-in selection/insertion. |
SOLO | Enables/disables Solo button. |
ON | Enables/disables Mute button. |
Fader | Adjusts volume, or duplicates Encoder in Flip mode. |
The following table outlines the controls in the MACHINE CONTROL section and their assignments:
Control | Assignment |
---|---|
display | Opens or closes the Marker tab in the Lists area. |
1 to 8 | Recalls markers 1 to 8. |
REW | Shuttles backward. |
FF | Shuttles forward. |
STOP | Stop |
PLAY | Play |
REC | Record |
The following table outlines the data entry controls and their assignments:
Control | Assignment |
---|---|
SCRUB | Enables/disables Scrub mode. |
SHUTTLE | Enables/disables Shuttle mode. |
Parameter Wheel | Default: adjusts the value of the currently selected parameter. Scrub: Scrub mode. Shuttle: Shuttle mode. |
ENTER | Enters selected folder. |
DEC | Exits folder. |
INC | Switches between Cursor and Zoom modes. |
Cursor Up | Cursor mode: equivalent to computer keyboard Up Arrow key. Zoom mode: zooms out vertically. |
Cursor Down | Cursor mode: equivalent to computer keyboard Down Arrow key. Zoom mode: zooms out vertically. |
Cursor Left | Cursor mode: equivalent to computer keyboard Left Arrow key. Zoom mode: zooms out horizontally. |
Cursor Right | Cursor mode: equivalent to computer keyboard Right Arrow key. Zoom mode: zooms in horizontally. |