Roland SI-24: Assignment Overview

The following sections outline the assignment of Roland SI-24 interface elements to Logic functions.

Roland SI-24: Channel Strips

The following table outlines the channel strip controls and their assignments:

Note: A modifier button (such as SHIFT) shown below a button description indicates that the button has an alternate function or use while the modifier is held down.

Control
Modifier
Assignment
EQ ON/OFF 1 to 4
In Pan mode:
  • Switches the bypass state of EQ bands 1–4.

  • Enters EQ/Send mode. If no Channel or Linear Phase EQ is present on the selected channel, a Channel EQ is automatically inserted.

In EQ/Send mode:
  • Switches the bypass state of EQ bands 1–4. The button LED is lit when the EQ is enabled.

In Plug-in mode:
  • Switches between Inserts 1–4. A lit button LED indicates the selected Insert slot.

  • If a plug-in window is open, it will update to reflect the plug-in parameters of the selected Insert slot.

SHIFT
In EQ/Send mode: Enables/disables Send 1–4 Mute.
EQ/SEND
Switches Channel view modes between:
  • EQ/Send Edit mode (LED on).

  • Pan Edit mode (LED off).

PLUG-IN
Switches Channel view modes between:
  • Plug-in Edit mode (LED on). (Plug-in window opens.)

  • Pan Edit mode (LED off).

Plug-in window closes when Plug-in Edit mode is exited.
SHIFT
Switches Channel view modes between:
  • Instrument Edit mode (LED on). (Instrument window opens.)

  • Pan Edit mode (LED off).

Instrument plug-in window closes when Instrument Edit mode is exited.
PAN 1 to 12
In Pan Edit mode:
  • Controls channel strip Pan/Balance (surround angle for channels in surround mode).

In EQ/Send mode:
  • 1/3/5/7: Control the Gain parameter of EQ bands 1–4.

  • 2/4/6/8: Control the Frequency parameter of EQ bands 1–4.

  • 9–12: Control Send 1–4 levels.

In Plug-in Edit mode:
  • 1–10: Edits plug-in parameter.

  • 11: Bypasses the plug-in.

  • 12: Shifts plug-in parameter page. (A page is a collection of parameters.)

In Instrument mode:
  • 1–10: Edits Instrument parameter.

  • 11: Bypasses the instrument plug-in.

  • 12: Shifts Instrument parameter page.

SHIFT
In EQ/Send mode:
  • 2/4/6/8: Control the Q-Factor of EQ bands 1–4.

  • 9–12: Determine Send 1–4 destinations.

CH SELECT 1 to 12
Selects track/channel.
STATUS 1 to 12
In Automation mode: Switches Automation mode between:
  • Off (LED off)

  • Read (green)

  • Latch (orange)

  • Write (red)

In Record Ready mode: Activates/deactivates Record Enable. In Solo mode: Enables/disables Solo. In Mute mode: Enables/disables Mute.
Fader 1 to 12
Controls volume.

Roland SI-24: STATUS MODE Section

The following table outlines the status mode controls and their assignments:

Note: A modifier button (such as SHIFT) shown below a button description indicates that the button has an alternate function or use while the modifier is held down.

Control
Modifier
Assignment
AUTOMIX
Sets STATUS 1 to 12 buttons to Automation mode.
SHIFT
Sets all tracks to Off, Read, Latch, or Write automation mode. Repeatedly press this button combination to cycle through automation modes.
REC/PLAY
Sets STATUS 1 to 12 buttons to Record Enable mode.
SOLO
Sets STATUS 1 to 12 buttons to Solo mode.
MUTE
Sets STATUS 1 to 12 buttons to Mute mode.

Roland SI-24: CH ASSIGN Controls

The following table outlines the channel assign controls and their assignments:

Note: A modifier button (such as SHIFT) shown below a button description indicates that the button has an alternate function or use while the modifier is held down.

Control
Modifier
Assignment
INPUT
Shows the first 12 audio input channel strips.
SHIFT
Shows the first 12 MIDI channel strips.
OUTPUT
Shows the first 12 output channel strips:
  • 1: Output 1–2 (default surround assignment: front)

  • 2: Output 3–4 (default surround assignment: rear)

  • 3: Output 5 (default surround assignment: center)

  • 4: Output 6 (default surround assignment: LFE)

  • 5: Output 7–8 (digital out)

SHIFT
Shows the first 12 audio channels.
BUS
Shows the first 12 aux channels.
SHIFT
Shows the first 12 instrument channels.
Tr 1 to 12
Switches to Arrange view and shows the first 12 channels.
Tr 13 to 24
Switches to Arrange view and displays channel 13 to 24.

Roland SI-24: MASTER Section

The following table outlines the master fader control and its assignment:

Control
Assignment
Master fader
Controls the master channel strip.

Roland SI-24: SURROUND PAN Section

The following table outlines the surround pan controls and their assignments:

Control
Assignment
ON/OFF
Switches selected channel output between:
  • Surround (LED on)

  • Out 1–2 (LED off)

Also shows/hides the Surround Pan window.
Joystick
Surround X/Y of selected channel

Roland SI-24: Numeric Key Section

The following table outlines the numeric key controls and their assignments:

Note: A modifier button (such as SHIFT) shown below a button description indicates that the button has an alternate function or use while the modifier is held down.

Control
Modifier
Assignment
SYSTEM
Switches SI-24 to System mode. See SI-24 user manual for details.
LOCATE
Switches numeric keys to Locate mode.
SHORT CUT
Switches numeric keys to Shortcut mode.
SCREEN SET
Switches numeric keys to Screenset mode.
0 to 9
System mode: See SI-24 user manual.
Locate mode:
  • 1 to 9: Moves playhead to marker 1 to 9 positions.

  • 0: Creates marker at playhead position.

Shortcut mode:
  • 1: Saves project. LED is lit if project has changed since last save.

  • 2: Performs Undo (of last editing operation). LED is on if a Redo is possible.

  • 3: Copies the selection (of regions or events).

  • 4: Pastes the Clipboard contents.

  • 5: Deletes the selection.

  • 6: Enables/disables Scrub mode. LED is on if Scrub mode is enabled.

  • 7: Enables/disables Cycle mode. LED is on if Cycle mode is enabled.

  • 8: Enables/disables Autopunch mode. LED is on if Autopunch mode is enabled.

  • 9: Switches Arrange window to Hyper Draw volume view.

  • 0: Switches Arrange window to Hyper Draw pan view.

Screenset mode:
  • 1 to 9: Recall screensets 1 to 9.

  • 0: Enables/disables Lock Screenset command.

SHIFT
Locate mode:
  • 1 to 9: Moves playhead to marker 10 to 18 positions.

  • 0: Deletes marker at playhead position.

Shortcut mode:
  • 1: Performs Save As.

  • 2: Performs Redo (reverses last Undo operation).

  • 3: Cuts selection.

  • 4: Pastes the Clipboard contents.

Screenset mode:
  • 1: Opens/Closes Arrange window.

  • 2: Opens/Closes Mixer.

  • 3: Opens/Closes Event Editor.

  • 4: Opens/Closes Score Editor.

  • 5: Opens/Closes Hyper Editor.

  • 6: Opens/Closes Piano Roll Editor.

  • 7: Opens/Closes Transport window.

  • 8: Opens/Closes Audio Bin window.

  • 9: Opens/Closes Sample Editor.

Roland SI-24: Transport Section

The following table outlines the transport controls and their assignments:

Control
Assignment
PAUSE
Pause
REW
Rewinds playhead in one-bar increments.
F FWD
Advances playhead by one bar.
STOP
Stops playback.
PLAY
Starts playback.
RECORD
Starts recording.
Jog Wheel
Scrub mode off: Moves playhead in one-bar increments.
Scrub mode on: Scrubs (audio and MIDI).