The following sections outline the assignment of Yamaha DM1000 interface elements to Logic functions.
The following table outlines the DISPLAY ACCESS controls and their assignments:
Note: A modifier button, such as SHIFT/ADD, shown below a control description indicates that the control has an alternate function while the modifier is held down. Modifier buttons that need to be assigned manually by the user are shown with an asterisk (*) that precedes the button name.
Control | Modifier | Assignment |
---|---|---|
AUTOMIX | When AUTOMIX is held down in Channel Display mode, the display shows the automation mode of the 16 channel strips in the current bank selection. | |
PAIR/GROUP | Enters Group Edit mode:
| |
*DAW SHIFT/ADD | Switches the Mixer to the Arrange view, displaying all channel strips that correspond to tracks used in the Arrange area, along with their signal flow. | |
METER | Clears overload LEDs. | |
*DAW SHIFT/ADD | Switches the Mixer to the All view, displaying all channel strips that exist in your project. | |
*DAW ALT/FINE | Opens or closes a second Arrange window. | |
EFFECT | Opens or closes the Sample Editor. |
The following table outlines the AUX SELECT controls and their assignments:
Note: A modifier button, such as SHIFT/ADD, shown below a control description indicates that the control has an alternate function while the modifier is held down. Modifier buttons that need to be assigned manually by the user are shown with an asterisk (*) that precedes the button name.
Control | Modifier | Assignment |
---|---|---|
AUX 1 | In Insert Display mode:
In Channel Display mode:
| |
*DAW SHIFT/ADD | Same as AUX 5, but for Send 6 | |
AUX 2 | Same as AUX 1, but for Send 2 | |
*DAW SHIFT/ADD | Same as AUX 5, but for Send 7 | |
AUX 3 | Same as AUX 1, but for Send 3. | |
*DAW SHIFT/ADD | Same as AUX 5, but for Send 8 | |
AUX 4 | Same as AUX 1, but for Send 4 | |
AUX 5 | In Insert Display mode:
In Channel Display mode:
| |
AUX 6 | Switches SEL buttons and encoder buttons between normal behavior and setting a parameter’s default value. When the AUX 6 button is held down:
| |
AUX 8 | Determines mode of channel strip SEL buttons when the STEREO section AUTO button is off:
|
The following table outlines the ENCODER MODE controls and their assignments:
Control | Assignment |
---|---|
PAN |
|
AUX |
|
The following table outlines the FADER MODE control and its assignment:
Control | Assignment |
---|---|
FADER/AUX | Enables/disables Flip mode. |
The following table outlines the LCD controls and their assignments:
Note: A modifier button, such as SHIFT/ADD, shown below a control description indicates that the control has an alternate function while the modifier is held down. Modifier buttons that need to be assigned manually by the user are shown with an asterisk (*) that precedes the button name.
Control | Modifier | Assignment |
---|---|---|
Left & Right Tab Scroll buttons | Plug-in Edit mode: shifts the parameter display to show the next/previous page of parameter controls (usually four) for the selected plug-in. | |
*DAW ALT/FINE | Plug-in Edit mode: shifts the parameter display up/down by one parameter for the selected plug-in. |
The LCD display contents reflect the page selected with the F2, F3, and F4 buttons.
The following elements are common across all pages in the LCD.
Display | Assignment |
---|---|
TIME CODE | Active if counter is displaying SMPTE time code |
BEATS | Active if counter is displaying bars/beats/divisions/ticks |
Counter | Displays either SMPTE time code or bars/beats/divisions/ticks. |
SELECT ASSIGN | Displays the encoder assignment as follows: Pan, Snd1 to Snd8, S1As to S8As, In, Out. |
Press the F2 button to select Insert Display mode. In this mode, the LCD displays parameters, allowing you to edit effects. This mode also allows you to switch between different Insert slots, enabling each effect to be edited.
Control | Assignment |
---|---|
COMPARE | Switches the display between “track name/parameter name” and “parameter name/parameter value” modes. |
BYPASS | Switches the bypass state of plug-in currently being edited. |
INSERT/PARAM | Switches between Plug-in Assign and Plug-in Edit modes. |
Selecting virtual encoders 1 to 4 (Use cursor keys, and then press ENTER button.) | Pan Assignment mode:
Send Assignment mode:
Plug-in Assignment mode:
Plug-In Edit mode:
|
Moving virtual encoders 1 to 4 (Use cursor keys, and then rotate parameter wheel.) | Pan Assignment mode:
Send Assignment mode:
Plug-in Assignment mode:
Plug-in Edit mode:
|
Press the F3 button to select Channel Display mode. In this mode, the parameter controls, such as pan and send level, for channel strips 1 to 16 are displayed.
Control | Assignment |
---|---|
Selecting virtual encoders 1 to 4 (Use cursor keys, and then press ENTER button.) | When Send 1 to 8 is selected: edits Send pre/post fader position, enables or disables Send mute, or sets Send level to default value. Send, Input, or Output Assignment mode: confirms selection. |
Moving virtual encoders 1 to 4 (Use cursor keys, and then rotate parameter wheel.) | Adjusts parameter selected in the ENCODER MODE and AUX SELECT sections. |
The following table outlines the data entry controls and their assignments:
Note: A modifier button, such as SHIFT/ADD, shown below a control description indicates that the control has an alternate function while the modifier is held down. Modifier buttons that need to be assigned manually by the user are shown with an asterisk (*) that precedes the button name.
Control | Modifier | Assignment |
---|---|---|
Parameter wheel | Default: adjusts the value of the currently selected parameter. | |
* DAW SHUTTLE | Switches the parameter wheel to Shuttle mode. | |
* DAW SCRUB | Switches the parameter wheel to Scrub mode. | |
[DEC] button | Default: exits folder. In Go to Marker dialog: cancels dialog. | |
* DAW ALT/FINE | Opens or closes the Audio Bin tab in the Media area. | |
[INC] button | Enters the selected folder. |
The following table outlines the channel strip controls and their assignments:
Note: A modifier button, such as SHIFT/ADD, shown below a control description indicates that the control has an alternate function while the modifier is held down. Modifier buttons that need to be assigned manually by the user are shown with an asterisk (*) that precedes the button name.
Control | Modifier | Assignment |
---|---|---|
Encoder | Adjusts parameter selected in the ENCODER MODE and AUX SELECT sections. | |
Encoder Select button | Pan selected: sets pan to center position. Send 1 to 8 selected: edits Send pre/post position, activates/deactivates Send mute, or sets Send level to default value. Send Assign, Input, or Output selected: confirms selection. | |
SEL | If AUTO off:
If AUTO on:
| |
*DAW SHIFT/ADD | Resets the volume level. | |
SOLO | Enables/disables the Solo button. | |
*DAW OPTION/ALL | Disables Solo button of all channel strips. | |
ON | Enables/disables the Mute button. | |
*DAW OPTION/ALL | Unmutes all channel strips. | |
Fader | Adjusts volume, or duplicates encoder assignment in Flip mode. |
The following table outlines the stereo channel strip control and its assignment:
Control | Assignment |
---|---|
AUTO | Switches channel strip SEL buttons between channel and insert selection duties. |
These keys can be assigned to the following functions:
Note: A modifier button, such as SHIFT/ADD, shown below a control description indicates that the control has an alternate function while the modifier is held down. Modifier buttons that need to be assigned manually by the user are shown with an asterisk (*) that precedes the button name.
Control | Modifier | Assignment |
---|---|---|
DAW WIN STATUS | Opens or closes the Audio Bin tab in the Media area. | |
DAW REC/RDY 1 to 16 | Enables/disables the Record Enable button of the specified channel strip. | |
DAW WIN TRANSPORT | Opens or closes the Transport bar window. | |
DAW BANK – | Shifts channel strips by one bank to the left. | |
DAW BANK + | Shifts channel strips by one bank to the right. | |
DAW SHIFT/ADD | Enables a second function/use for some buttons. | |
DAW OPTION/ALL | While held down, Value Change mode is set to Full. Turning the encoder to the right sets the maximum value. Turning it to the left sets the minimum value. The encoder also stops at its default value. Also see description of other buttons. | |
DAW GROUP STATUS | Enters Group Edit mode:
| |
*DAW SHIFT/ADD | Switches the Mixer to the Arrange view, displaying all channel strips that correspond to tracks used in the Arrange area, along with their signal flow. The channel strips on your DM1000 device will also reflect the ‘Arrange’ Channel Strip View mode. | |
DAW SUSPEND GRP | Enables/disables the Group Clutch. | |
*DAW SHIFT/ADD | Switches the Mixer to the Arrange view, displaying all channel strips that correspond to tracks used in the Arrange area, along with their signal flow. The channel strips on your DM1000 device will reflect the ‘Tracks’ Channel Strip View mode, and not the ‘Arrange.’ | |
DAW CREATE GROUP | Creates a new group and enters Group Edit mode (see above). | |
*DAW SHIFT/ADD | Switches the Mixer to the All view, displaying all channel strips that exist in your project. The channel strips on your DM1000 device will also reflect the ‘All’ Channel Strip View mode. | |
DAW WIN MIX/EDIT | Switches between the Arrange window and the Mixer. | |
DAW CHANNEL - | Shifts channel strips by one channel strip to the left. | |
DAW CHANNEL+ | Shifts channel strips by one channel strip to the right. | |
DAW CTRL/CLUTCH | While held down, all groups are disabled. | |
DAW ALT/FINE | While held down, Value Change mode is set to Fine: value changes work at maximum resolution. Also see description of other buttons. | |
DAW MONI STATUS | — | |
DAW UNDO | Performs an Undo of the last editing operation. | |
*DAW SHIFT/ADD | Performs a Redo of the last Undo operation. | |
*DAW OPTION/ALL | Opens the Undo History window. | |
DAW SAVE | Saves the project. | |
*DAW OPTION/ALL | Performs a Save As operation, allowing you to save the project with a different name. | |
DAW WIN MEM-LOC | Opens or closes the Marker tab in the Lists area. | |
DAW EDIT TOOL | Selects the next tool. While held down, numerical buttons select a specific tool. | |
DAW WIN INSERT | Opens or closes the Sample Editor. | |
DAW REC/RDY ALL | Disables the Record Enable buttons of all channel strips. | |
DAW SCRUB | Enables/disables Scrub mode. | |
DAW SHUTTLE | Enables/disables Shuttle mode. | |
DAW REW | Shuttles backward. | |
DAW FF | Shuttles forward. | |
DAW STOP | Stop | |
DAW PLAY | Play | |
*DAW SHIFT/ADD | Pause | |
DAW REC | Record | |
DAW PRE | Sets the left locator at current playhead position. | |
DAW IN | Sets the punch in locator at current playhead position. | |
DAW OUT | Sets the punch out locator at current playhead position. | |
DAW POST | Sets the right locator at current playhead position. | |
DAW RTZ | Moves the playhead to the left locator position. | |
DAW END | Moves the playhead to the right locator position. | |
DAW ONLINE | Activates or deactivates internal/external synchronization. | |
DAW QUICK PUNCH | Enables/disables Autopunch mode. | |
DAW AUTO FADER | Enables/disables volume automation playback and recording. | |
DAW AUTO PAN | Enables/disables pan automation playback and recording. | |
DAW AUTO PLUGIN | Enables/disables plug-in parameter automation playback and recording. | |
DAW AUTO MUTE | Enables/disables mute automation playback and recording. | |
DAW AUTO SEND | Enables/disables send level automation playback and recording. | |
DAW AUTO WRITE | Sets selected channel strip, or channel strip group, to Write automation mode. While held down, and with the STEREO channel strip AUTO button enabled, sets automation mode to “Write.” | |
*DAW OPTION/ALL | Sets all channel strips to Write automation mode. | |
DAW AUTO TOUCH | Sets selected channel strip, or channel strip group, to Touch automation mode. While held down, and with the STEREO channel strip AUTO button enabled, sets automation mode to “Touch.” | |
*DAW OPTION/ALL | Sets all channel strips to Touch automation mode. | |
DAW AUTO LATCH | Sets selected channel strip, or channel strip group, to Latch automation mode. While held down, and with the STEREO channel strip AUTO button enabled, sets automation mode to “Latch.” | |
*DAW OPTION/ALL | Sets all channel strips to Latch automation mode. | |
DAW AUTO READ | Sets selected channel strip, or channel strip group, to Read automation mode. While held down, and with the STEREO channel strip AUTO button enabled, sets automation mode to “Read.” | |
*DAW OPTION/ALL | Sets all channel strips to Read automation mode. | |
DAW AUTO TRIM | — | |
DAW AUTO OFF | Sets selected channel strip, or channel strip group, to Off automation mode. While held down, and with the STEREO channel strip AUTO button enabled, sets automation mode to “Off.” | |
*DAW OPTION/ALL | Sets all channel strips to Off automation mode. | |
DAW AUTO STATUS | While held down in Channel Display mode, the display shows the automation mode of the 16 channel strips in the current bank selection. |