Yamaha 01V96: Assignment Overview

The following sections outline the assignment of Yamaha 01V96 interface elements to Logic functions.

Yamaha 01V96: DISPLAY ACCESS Section

The following table outlines the DISPLAY ACCESS controls and their assignments:

Note: A modifier button (such as SHIFT/ADD) below a control description indicates that the control has an alternate function or use while the modifier is held down. Modifier buttons that need to be assigned manually by the user are shown with an asterisk (*) that precedes the control name.

Control
Modifier
Assignment
*DAW AUTO STATUS
While held down in Channel Display mode, the display shows the automation mode of the 16 channel strips in the current bank selection.
PAIR/GROUP
Enters Group Edit mode:
  • When a channel strip group is selected, channel strip membership is indicated by a lit SEL button. Use this button to enable/disable the channel strip’s group membership.

  • Virtual encoders 1 to 4 display properties of the currently selected group.

  • Virtual encoder buttons 1 to 4 enable/disable properties of the currently selected group.

  • When INSERT/PARAM is set to PARAM, the left and right Tab Scroll buttons scroll through the group properties. When set to INSERT, the buttons scroll through the groups for editing.

*DAW SHIFT/ADD
Switches the Mixer to the Arrange view, displaying all channel strips that correspond to tracks used in the Arrange area, along with their signal flow.
EFFECT
Opens or closes the Sample Editor.

Yamaha 01V96: FADER MODE Section

The following table outlines the FADER MODE controls and their assignments:

Note: A modifier button (such as SHIFT/ADD) below a control description indicates that the control has an alternate function or use while the modifier is held down. Modifier buttons that need to be assigned manually by the user are shown with an asterisk (*) that precedes the control name.

Control
Modifier
Assignment
AUX 1
In Insert Display mode:
  • Assigns Send 1 level of channel strips to encoders.

  • Assigns Send 1 level of the selected channel strip to virtual encoders.

  • Assigns Sends 1 to 4 of the selected channel strip to virtual encoders. Use the ENTER button to switch the bypass state of Sends 1 to 4.

In Channel Display mode:
  • Assigns Send 1 level of channel strips to encoders and virtual encoders.

  • Shows current Send 1 destination assignment, when button is held down.

*DAW SHIFT/ADD
Same as AUX 5, but for Send 6.
AUX 2
Same as AUX 1, but for Send 2.
*DAW SHIFT/ADD
Same as AUX 5, but for Send 7.
AUX 3
Same as AUX 1, but for Send 3.
*DAW SHIFT/ADD
Same as AUX 5, but for Send 8.
AUX 4
Same as AUX 1, but for Send 4.
AUX 5
In Insert Display mode:
  • Assigns Send 5 level of channel strips to encoders.

  • Assigns Send 5 level of the selected channel strip to virtual encoders.

  • Assigns Sends 5 to 8 of the selected channel strip to virtual encoders. Use the ENTER button to switch the bypass state of Sends 5 to 8.

In Channel Display mode:
  • Assigns Send 5 level of channel strips to encoders and virtual encoders.

  • Shows current Send 5 destination assignment, when button is held down.

AUX 6
Switches SEL buttons and encoder buttons between normal behavior and setting a parameter’s default value.
When the AUX 6 button is held down:
  • Pressing a channel strip’s SEL button resets the channel strip’s volume level.

  • Pressing a channel strip’s encoder button resets the channel strip’s pan/surround value (PAN also needs to be selected in ENCODER MODE section).

AUX 7
Assigns Pan to encoders; assigns selected channel strip’s pan/surround parameters to virtual encoders.
AUX 8
Determines mode of channel strip SEL buttons:
  • AUX 8 indicator off: SEL button used for channel strip selection.

  • AUX 8 indicator on: SEL button used for Insert selection.

HOME
Enables/disables Flip mode.

Yamaha 01V96: Basic LCD Functions

The following table outlines the LCD controls and their assignments:

Note: A modifier button (such as SHIFT/ADD) below a control description indicates that the control has an alternate function or use while the modifier is held down. Modifier buttons that need to be assigned manually by the user are shown with an asterisk (*) that precedes the control name.

Control
Modifier
Assignment
Left/Right buttons
Plug-in Edit mode: Shifts the parameter display to show the next/previous page of parameter controls (usually four) for the selected plug-in.
*DAW ALT/FINE
Plug-in Edit mode: Shifts the parameter display up/down by one parameter for the selected plug-in.
F1
Clears overload LEDs.
*DAW SHIFT/ADD
Switches the Mixer to the All view, displaying all channel strips that exist in your project.
*DAW ALT/FINE
Opens or closes a second Arrange window.

Yamaha 01V96: LCD Modal Display Functions

The LCD displays different data, depending on the page selected with the F2, F3, and F4 buttons:

Insert Display Mode

Press the F2 button to select Insert Display mode. In this mode, the LCD displays parameters, allowing you to edit effects. This mode also allows you to switch between different Insert slots, enabling each effect to be edited.

Display
Assignment
TIME CODE
Active if counter is displaying SMPTE time code.
BEATS
Active if counter is displaying bars/beats/divisions/ticks.
Counter
Displays either SMPTE time code or bars/beats/divisions/ticks.
SELECT ASSIGN
Displays the encoder assignment as follows: Pan, Snd1 to Snd8, S1As to S8As, In, Out.
COMPARE
Switches the display between “track name/parameter name” and “parameter name/parameter value” modes.
BYPASS
Switches the bypass state of plug-in currently being edited.
INSERT/PARAM
Switches between Plug-in Assign and Plug-in Edit modes.
Selecting virtual encoders 1 to 4 (Use cursor keys, and then press ENTER button.)
Pan Assignment mode:
  • Parameter control 1 button centers pan or surround angle.

  • Parameter control 2 button centers surround diversity.

  • Parameter control 3 button centers surround LFE level.

  • Parameter control 4 button resets spread.

Send Assignment mode:
  • Enables/disables Sends 1 to 4 or 5 to 8.

Plug-in Assignment mode:
  • Confirms the plug-in selection for Insert slots 1 to 4 or 5 to 8, and enters Plug-in Edit mode for the selected Insert slot.

Plug-In Edit mode:
  • Sets value to default, or switches buttons with two states.

Moving virtual encoders 1 to 4 (Use cursor keys, and then rotate parameter wheel.)
Pan Assignment mode:
  • Parameter control 1 edits pan or surround angle.

  • Parameter control 2 edits surround diversity.

  • Parameter control 3 edits surround LFE level.

  • Parameter control 4 edits spread.

Send Assignment mode:
  • Controls the Send level of Sends 1 to 4 or 5 to 8.

Plug-in Assignment mode:
  • Chooses Insert slot 1 to 4 or 5 to 8.

Plug-in Edit mode:
  • Sets value.

Channel Display Mode

Press the F3 button to select Channel Display mode.

Control
Assignment
Moving virtual encoders 1 to 4 (Use cursor keys, and then rotate parameter wheel.)
Adjusts parameter selected in the ENCODER MODE and AUX SELECT sections.
Selecting virtual encoders 1 to 4 (Use cursor keys, and then press ENTER button.)
When Send 1 to 8 is selected: edits send pre/post fader position, enables or disables send mute, or sets send level to default value. Send, Input, or Output Assignment mode: confirms selection.

Meter Display Mode

Press the F4 button to select Meter Display mode.

Control
Assignment
Level Meters
Display momentary and peak level.

Yamaha 01V96: SELECTED CHANNEL Section

The following table outlines the SELECTED CHANNEL controls and their assignments:

Control
Assignment
Pan control
Adjusts the pan of the currently selected channel strip.

Yamaha 01V96: Data Entry Section

The following table outlines the data entry controls and their assignments:

Note: A modifier button (such as SHIFT/ADD) below a control description indicates that the control has an alternate function or use while the modifier is held down. Modifier buttons that need to be assigned manually by the user are shown with an asterisk (*) that precedes the control name.

Control
Modifier
Assignment
Parameter wheel
Default: adjusts the value of the currently selected parameter.
*DAW SHUTTLE
Switches the parameter wheel to Shuttle mode.
*DAW SCRUB
Switches the parameter wheel to Scrub mode.
[DEC] button
Default: exits folder. In Go to Marker dialog: cancels dialog.
*DAW ALT/FINE
Opens or closes the Audio Bin tab in the Media area.
[INC] button
Enters the selected folder.

Yamaha 01V96: Channel Strips

The following table outlines the channel strip controls and their assignments:

Note: A modifier button (such as SHIFT/ADD) below a control description indicates that the control has an alternate function or use while the modifier is held down. Modifier buttons that need to be assigned manually by the user are shown with an asterisk (*) that precedes the control name.

Control
Modifier
Assignment
SEL
Using *DAW AUTO OFF:
  • FADER MODE [AUX 8] off: selects channel.

  • FADER MODE [AUX 8] on: selects channel for insert assignment, allowing you to insert effects.

Using the *DAW AUTO automation modes (WRITE, TOUCH, LATCH, READ):
  • Cycles through automation modes. Sets the selected mode when an automation mode button is held down.

*DAW SHIFT/ADD
Resets the volume level.
SOLO
Enables/disables the Solo button.
*DAW OPTION/ALL
Disables the Solo button of all channel strips.
ON
Enables/disables the Mute button.
*DAW OPTION/ALL
Unmutes all channel strips.
Fader
Adjusts volume, or duplicates encoder assignment in Flip mode.

Yamaha 01V96: Stereo Channel Strip Section

The following table outlines the stereo channel strip control assignment:

Control
Assignment
SEL
Switches SEL buttons 1 to 16 between channel strip and automation mode selection. Pressing the SEL button repeatedly, when in automation mode, rotates all available automation modes.

Yamaha 01V96: User-Defined Keys Section

These keys can be assigned to the following functions:

Note: A modifier button (such as SHIFT/ADD) below a control description indicates that the control has an alternate function or use while the modifier is held down. Modifier buttons that need to be assigned manually by the user are shown with an asterisk (*) that precedes the control name.

Control
Modifier
Assignment
DAW WIN STATUS
Opens or closes the Audio Bin tab in the Media area.
DAW REC/RDY 1 to 16
Enables/disables the Record Enable button of the specified channel strip.
DAW WIN TRANSPORT
Opens or closes the Transport bar window.
DAW BANK –
Shifts channel strips by one bank to the left.
DAW BANK +
Shifts channel strips by one bank to the right.
DAW SHIFT/ADD
Enables a second function/use for some buttons.
DAW OPTION/ALL
While held down, Value Change mode is set to Full. Turning the encoder to the right sets the maximum value. Turning it to the left sets the minimum value. The encoder also stops at its default value. See description of other buttons.
DAW GROUP STATUS
Enters Group Edit mode:
  • When a channel strip group is selected, channel strip membership is indicated by a lit SEL button. Use this button to enable/disable the channel strip’s group membership.

  • Virtual encoders 1 to 4 display properties of the currently selected group.

  • Virtual encoder buttons 1 to 4 enable/disable properties of the currently selected group.

  • When INSERT/PARAM is set to PARAM, the left and right Tab Scroll buttons scroll through the group properties. When set to INSERT, the buttons scroll through the groups for editing.

DAW SHIFT/ADD
Switches the Mixer to the Arrange view, displaying all channel strips that correspond to tracks used in the Arrange area, along with their signal flow.
The channel strips on your DM1000 device will also reflect the ‘Arrange’ Channel Strip View Mode.
DAW SUSPEND GROUP
Enables/disables the Group Clutch.
DAW SHIFT/ADD
Switches the Mixer to the Arrange view, displaying all channel strips that correspond to tracks used in the Arrange area, along with their signal flow.
The channel strips on your DM1000 device will reflect the ‘Tracks’ Channel Strip View Mode, and not the ‘Arrange.’
DAW CREATE GROUP
Creates a new group and enters Group Edit mode (see above).
DAW SHIFT/ADD
Switches the Mixer to the All view, displaying all channel strips that exist in your project.
The channel strips on your DM1000 device will also reflect the ‘All’ Channel Strip View Mode.
DAW WIN MIX/EDIT
Switches between the Arrange window and the Mixer.
DAW CHANNEL –
Shifts channel strips by one channel strip to the left.
DAW CHANNEL +
Shifts channel strips by one channel strip to the right.
DAW CTRL/CLUTCH
While held down, all groups are disabled.
DAW ALT/FINE
While held down, Value Change mode is set to Fine: value changes work at maximum resolution. Also see description of other buttons.
DAW MONI STATUS
DAW UNDO
Performs an Undo of the last editing operation.
DAW SHIFT/ADD
Performs a Redo of the last Undo operation.
DAW OPTION/ALL
Opens the Undo History window.
DAW SAVE
Saves the project.
DAW OPTION/ALL
Performs a Save As operation, allowing you to save the project with a different name.
DAW WIN MEM-LOC
Opens or closes the Marker tab in the Lists area.
DAW EDIT TOOL
Selects the next tool. While held down, numerical buttons select a specific tool.
DAW WIN INSERT
Opens or closes the Sample Editor.
DAW REC/RDY ALL
Disables the Record Enable buttons of all channel strips.
DAW SCRUB
Enables/disables Scrub mode.
DAW SHUTTLE
Enables/disables Shuttle mode.
DAW REW
Shuttles backward.
DAW FF
Shuttles forward.
DAW STOP
Stop
DAW PLAY
Play
DAW SHIFT/ADD
Pause
DAW REC
Record
DAW PRE
Sets the left locator at current playhead position.
DAW IN
Sets the punch in locator at current playhead position.
DAW OUT
Sets the punch out locator at current playhead position.
DAW POST
Sets the right locator at current playhead position.
DAW RTZ
Moves the playhead to the left locator position.
DAW END
Moves the playhead to the right locator position.
DAW ONLINE
Activates or deactivates internal/external synchronization.
DAW QUICK PUNCH
Enables/disables Autopunch mode.
DAW AUTO FADER
Enables/disables volume automation playback and recording.
DAW AUTO PAN
Enables/disables pan automation playback and recording.
DAW AUTO PLUGIN
Enables/disables plug-in parameter automation playback and recording.
DAW AUTO MUTE
Enables/disables mute automation playback and recording.
DAW AUTO SEND
Enables/disables send level automation playback and recording.
DAW AUTO WRITE
Sets all channel strips to Write automation mode.
DAW OPTION/ALL
Sets selected channel strip, or channel strip group, to Touch automation mode. While held down, and with the STEREO channel strip AUTO button enabled, sets automation mode to “Touch.”
DAW AUTO TOUCH
Sets all channel strips to Touch automation mode.
DAW OPTION/ALL
Sets selected channel strip, or channel strip group, to Latch automation mode. While held down, and with the STEREO channel strip AUTO button enabled, sets automation mode to “Latch.”
DAW AUTO LATCH
Sets all channel strips to Latch automation mode.
DAW OPTION/ALL
Sets selected channel strip, or channel strip group, to Read automation mode. While held down, and with the STEREO channel strip AUTO button enabled, sets automation mode to “Read.”
DAW AUTO READ
Sets all channel strips to Read automation mode.
DAW OPTION/ALL
Sets all channel strips to Write automation mode.
DAW AUTO OFF
Sets selected channel strip, or channel strip group, to Off automation mode. While held down, and with the STEREO channel strip AUTO button enabled, sets automation mode to “Off.”
DAW OPTION/ALL
Sets all channel strips to Off automation mode.
DAW AUTO STATUS
While held down in Channel Display mode, the display shows the automation mode of the 16 channel strips in the current bank selection.