Change the Mixer view

When the number of channel strips in the Mixer exceeds the amount of available space, you can change the Mixer view.

You can use the Single, Tracks, or All button to display only those channel strips that you need for the task at hand, or filter channel strips by type, using the channel strip filter buttons. You can use the View menu in the mixer and keyboard shortcuts to hide or shows specific types of channel strips. You also have the option of working with narrow channel strips or hiding the legend that appears on the left side of the Mixer.

Hide or show signal flow channel strips

Do one of the following:

Choose View > Signal Flow Channel Strips.
Use the Show/Hide Signal Flow Channel Strips keyboard shortcut.

Hide or show only channel strips with sends

Choose View > Channels with Sends Only.

Show or hide all tracks assigned to the same channel strip or instrument

Do one of the following:

Choose View > All Tracks with Same Channel Strip/Instrument.
Use Show/Hide All Tracks with Same Channel Strip/Instrument keyboard shortcut.

Show or hide channel strips for tracks not normally shown in the mixer

Do one of the following:

Choose View > Other Tracks.
Use the keyboard shortcut for Show/Hide Other Tracks.

Switch between narrow and wide channel strips

Do either of the following:

Click the Narrow Channel Strips button to reduce the width of channel strips.
Click the Wide Channel Strips button to increase the width of channel strips.

Hide or show the Mixer legend

Choose View > Hide Legend from the Mixer menu bar.
Choose View > Show Legend to show it again.