Mackie Baby HUI: Assignment Overview

Assignments of Mackie Baby HUI interface elements to Logic functions are covered in the following sections:

Mackie Baby HUI: Channel Strips

The following table outlines the channel strip controls and their assignments:

Note: If SHIFT is shown below a button description, it indicates that the control has an alternate use while the modifier is held down.

Control
Modifier
Assignment
Rotary encoder
Adjusts the parameter selected in the Encoder Assignment section.
Rotary encoder push button
Selects a channel strip.
SHIFT
Turns Record Enable button of selected channel on/off.
Signal indicator
Illuminates when a signal is present in the channel. It also indicates channel selection.
SOLO
Enables or disables Solo.
MUTE
Enables or disables Mute.
Fader
Adjusts volume.

Mackie Baby HUI: Encoder Assignment Section

The following table outlines the encoder assignment controls and their assignments:

Control
Assignment
PAN
Assigns pan to rotary encoders.
SEND 1
Assigns Send 1 level to rotary encoders.
SEND 2
Assigns Send 2 level to rotary encoders.
SEND 3
Assigns Send 3 level to rotary encoders.
SEND 4
Assigns Send 4 level to rotary encoders.

Mackie Baby HUI: Automation Section

The following table outlines the automation controls and their assignments:

Note: If SHIFT is shown below a button description, it indicates that the control has an alternate use while the modifier is held down.

Control
Modifier
Assignment
BYPASS/OFF
Sets selected channel to Off automation mode.
SHIFT
Enables or disables playback and recording of level (volume) automation.
READ
Sets selected channel to Read automation mode.
SHIFT
Enables or disables playback and recording of mute automation.
WRITE
Sets selected channel to Write automation mode.
SHIFT
Enables or disables playback and recording of pan automation.
TOUCH
Sets selected channel to Touch automation mode.
SHIFT
Enables or disables playback and recording of send level automation.

Mackie Baby HUI: Display Section

The following table outlines the display controls and their assignments:

Control
Assignment
TRANSPORT
Opens or closes the Transport bar window.
MEM–LOC
Opens or closes the Marker List.
MIXER
Opens or closes the Mixer.
EDIT
Opens or closes the Arrange window.

Mackie Baby HUI: Utility Section

The following table outlines the utility controls and their assignments:

Control
Assignment
UNDO
Undoes the last editing step.
SHIFT
Shifts to alternate use of some buttons.

Mackie Baby HUI: Navigation Section

The following table outlines the navigation controls and their assignments:

Note: If SHIFT is shown below a button description, it indicates that the control has an alternate use while the modifier is held down.

Control
Modifier
Assignment
RTZ
Navigates to the left locator.
SHIFT
Sets the punch in locator (at current playhead position).
END
Navigates to the right locator.
SHIFT
Sets the punch out locator (at current playhead position).
BANK SELECT Left
Shifts channel strips by one bank to the left.
SHIFT
Shifts channel strips by one channel to the left.
BANK SELECT Right
Shifts channel strips by one bank to the right.
SHIFT
Shifts channel strips by one channel to the right.

Mackie Baby HUI: Transport Section

The following table outlines the transport controls and their assignments:

Control
Assignment
REWIND
Shuttles backward.
FAST FWD
Shuttles forward.
STOP
Stop
PLAY
Play
RECORD
Record