The Stereo Delay works much like the Tape Delay (see Tape Delay), but allows you to set the Delay, Feedback, and Mix parameters separately for the left and right channels. The Crossfeed knob for each stereo side determines the feedback intensity or the level at which each signal is routed to the opposite stereo side. You can freely use the Stereo Delay on mono tracks or busses when you want to create independent delays for the two stereo sides.
Note: If you use the effect on mono channel strips, the track or bus will have two channels from the point of insertion—all Insert slots after the chosen slot will be stereo.
As the parameters for the left and right delays are identical, the descriptions below only cover the left channel—the right channel information is provided in brackets, if named differently. Parameters that are common to both channels are shown separately.