The following sections outline the assignment of Mackie HUI interface elements to Logic functions.
The following table outlines the controls in the ASSIGN section and their assignments:
Note: A modifier button, such as SHIFT, below a button description indicates that the button has an alternate use while the modifier is held down.
Control | Modifier | Assignment |
---|---|---|
SEND A | Assigns Send 1 level to V-Pots, and Send 1 to 4 levels to DSP V-Pots. While SEND A is held down, the scribble strips show the current Send 1 destination (a bus number). | |
SHIFT/ADD | As above, for Send 6 | |
SEND B | As above, for Send 2 | |
SHIFT/ADD | As above, for Send 7 | |
SEND C | As above, for Send 3 | |
SHIFT/ADD | As above, for Send 8 | |
SEND D | As above, for Send 4 | |
SEND E | As above, for Send 5 | |
PAN | Assigns Pan to V-Pots, and the selected (surround) channel strip’s pan/surround parameters to DSP V-Pots. You must confirm any changes made with the DSP V-Pots by pressing the corresponding V-Select button. | |
INPUT | Assigns channel strip input to V-Pots. While held down, the scribble strips show the current channel strip input assignment. The four DSP V-Pots control the following parameters of the selected channel strip: format, input, output, and automation mode. You must confirm any changes made with the V-Pots or DSP V-Pots by pressing the corresponding V-Select button. | |
OUTPUT | Assigns channel strip output to V-Pots. While held down, the scribble strips show the current channel strip output assignment. The four DSP V-Pots control the following parameters of the selected channel strip: format, input, output, and automation mode. You must confirm any changes made with the V-Pots or DSP V-Pots by pressing the corresponding V-Select button. | |
REC/RDY ALL | Disables Record Enable button of all channel strips. | |
BYPASS | Switches the INSERT buttons between Insert Select and Insert Bypass modes. See Insert entry in the Mackie HUI: Channel Strips table. | |
MUTE | Switches the V-Select buttons between Send Position and Send Mute modes. | |
SHIFT | Enables or disables Flip mode. | |
SELECT-ASSIGN | Displays the V-Pot assignment as follows: Pan, Snd1 to Snd8, S1As to S8As, In, Out. | |
SUSPEND | — | |
DEFAULT | Hold this button down to switch the V-Select buttons between standard operation and setting default values. | |
ASSIGN | When V-Pots display a send level, the ASSIGN button switches them to Send Destination Assignment mode (choosing a bus, in other words). Press the V-Select to confirm the assignment. The DSP V-Pots display the assignments of Send slots 1–4 or Send slots 5–8. Confirm any changes by pressing the V-Select button or all changes will be lost when you leave Send Destination Assignment mode, or press the Assign button a second time. |
The following table outlines the fader bank controls and their assignments:
Control | Assignment |
---|---|
Bank Left | Shifts channel strips by one bank (a group of channel strips or parameters) to the left. |
Bank Right | Shifts channel strips by one bank to the right. |
Channel Left | Shifts channel strips by one channel (or parameter) to the left. |
Channel Right | Shifts channel strips by one channel to the right. |
The following table outlines the window controls and their assignments:
Control | Assignment |
---|---|
TRANSPORT | Opens or closes the Transport bar window. |
EDIT | Opens or closes the Arrange window. |
MIX | Opens or closes the Mixer. |
ALT | Opens or closes the Sample Editor. |
STATUS | Opens or closes the Audio Bin. |
MEM-LOC | Opens or closes the Marker List. |
The following table outlines the keyboard shortcut controls and their assignments:
Note: A modifier button, such as SHIFT, below a button description indicates that the button has an alternate use while the modifier is held down.
Control | Modifier | Assignment |
---|---|---|
UNDO | Undoes last editing operation. | |
SHIFT/ADD | Redoes last editing operation. | |
OPTION/ALL | Opens Undo History window. | |
SAVE | Saves the project. | |
OPTION/ALL | Performs Save As function, allowing you to save the project with a different name. | |
EDIT MODE | — | |
EDIT TOOL | Selects the next tool. While held down, numerical buttons select a specific tool. | |
SHIFT/ADD | Shifts to alternate mode/use for some buttons. See descriptions of other buttons. | |
OPTION/ALL | While held down, value change mode is set to relative. This switches between a minimum, default, or maximum value for the edited parameter. Also see description of other buttons. | |
CTRL/CLUTCH | While held down, the Group Clutch is engaged. (All groups are disabled.) | |
CMD/ALT/FINE | While held down, Value Change mode is set to Fine. All value changes work at maximum resolution. Also see descriptions of other buttons. |
The following table outlines the channel strip controls and their assignments:
Note: A modifier button, such as SHIFT, below a button description indicates that the button has an alternate use while the modifier is held down.
Control | Modifier | Assignment |
---|---|---|
Level meters | Displays momentary and peak levels. | |
REC/RDY | Activates or deactivates the Record Enable button. | |
OPTION/ALL | Disables the Record Enable buttons of all channel strips. | |
INSERT |
| |
V-SEL |
| |
V-Pot | Adjusts parameter selected in the ASSIGN section. | |
AUTO | Cycles through automation modes. If you hold down an automation mode button, pressing AUTO sets this mode. | |
SOLO | Enables or disables the Solo button. | |
OPTION/ALL | Disables the Solo buttons of all channel strips. | |
MUTE | Enables or disables the Mute button. | |
OPTION/ALL | Disables the Mute buttons of all channel strips. | |
Scribble strip | Displays the channel strip name or send, input, or output assignment. | |
SELECT | Selects the channel strip. | |
SHIFT/ADD | Sets volume to unity level. | |
DEFAULT | Sets volume to unity level. | |
Fader | Adjusts volume, or duplicates the V-Pot assignment in Flip mode. |
The following table outlines the DSP controls and their assignments:
Note: A modifier button, such as SHIFT, below a button description indicates that the button has an alternate use while the modifier is held down.
Control | Modifier | Assignment |
---|---|---|
ASSIGN | — | |
COMPARE | Switches DSP display between “track name/parameter name” and “parameter name/parameter value” modes. | |
BYPASS | Switches the bypass state of the plug-in being edited. | |
DSP Select 1 to 4 |
| |
DSP V-Pots |
| |
INSERT/PARAM | Switches between Effect Assign and Effect Edit modes. | |
SCROLL | Effect Edit mode: Shifts parameter display by the number of DSP V-Pots in the control surface group (usually four). | |
CMD/ALT/FINE | Effect Edit mode: Shifts parameter display by one (parameter). |
The following table outlines the function keys and their assignments:
Note: A modifier button, such as SHIFT, below a button description indicates that the button has an alternate use while the modifier is held down.
Control | Modifier | Assignment |
---|---|---|
F1 | Clears Overload LEDs. | |
SHIFT/ADD | Switches to Mixer view, and displays MIDI channel strips. | |
CMD/ALT/FINE | Opens or closes Arrange window. | |
F2 | Recalls screenset 2. | |
SHIFT/ADD | Switches to Mixer view, and displays input channel strips. | |
CMD/ALT/FINE | Opens or closes Mixer. | |
F3 | Recalls screenset 3. | |
SHIFT/ADD | Switches to Mixer view, and displays audio channel strips. | |
SHIFT/ADD | Opens or closes Event List. | |
F4 | Recalls screenset 4. | |
SHIFT/ADD | Switches to Mixer view, and displays instrument channel strips. | |
CMD/ALT/FINE | Opens or closes Score Editor. | |
F5 | Recalls screenset 5. | |
SHIFT/ADD | Switches to Mixer view, and displays aux channel strips. | |
CMD/ALT/FINE | Opens or closes Hyper Editor. | |
F6 | Recalls screenset 6. | |
SHIFT/ADD | Switches to Mixer view, and displays bus channel strips. | |
CMD/ALT/FINE | Opens or closes Piano Roll Editor. | |
F7 | Switches counter display format between SMPTE and bars/beats/divisions/ticks. | |
SHIFT/ADD | Switches to Mixer view, and displays the master and output channel strips. | |
CMD/ALT/FINE | Opens or closes Transport bar window. | |
F8/ESC | Default: exits folder. Go to Marker mode: cancels dialog. | |
CMD/ALT/FINE | Opens or closes the Audio Bin. |
The following table outlines the global controls and their assignments:
Control | Assignment |
---|---|
FADER | Activates or deactivates the recording of volume automation. |
PAN | Activates or deactivates the recording of pan automation. |
PLUG IN | Activates or deactivates the recording of plug-in parameter automation. |
MUTE | Activates or deactivates the recording of mute automation. |
SEND | Activates or deactivates the recording of send level automation. |
SEND MUTE | — |
The following table outlines the automation controls and their assignments:
Note: A modifier button, such as SHIFT, below a button description indicates that the button has an alternate use while the modifier is held down.
Control | Modifier | Assignment |
---|---|---|
READ | Sets selected channel to Read automation mode. While held down, pressing the channel strip AUTO button sets the automation mode to Read. | |
OPTION/ALL | Sets all channels to Read automation mode. | |
LATCH | Sets selected channel to Latch automation mode. While held down, press the channel strip AUTO button to set automation mode to Latch. | |
OPTION/ALL | Sets all channels to Latch automation mode. | |
TRIM | — | |
TOUCH | Sets selected channel to Touch automation mode. While held down, press the channel strip AUTO button to set automation mode to Touch. | |
OPTION/ALL | Sets all channels to Touch automation mode. | |
WRITE | Sets selected channel to Write automation mode. While held down, press the channel strip AUTO button to set automation mode to Write. | |
OPTION/ALL | Sets all channels to Write automation mode. | |
OFF | Sets selected channel to Off automation mode. While held down, press the channel strip AUTO button to set automation mode to Off. | |
OPTION/ALL | Sets all channels to Off automation mode. |
The following table outlines the status/group controls and their assignments:
Note: A modifier button, such as SHIFT, below a button description indicates that the button has an alternate use while the modifier is held down.
Control | Modifier | Assignment |
---|---|---|
AUTO | While held down, the scribble strips display the automation mode of all channels. | |
MONITOR | — | |
PHASE—SHIFT | Switches to Single view. | |
GROUP | Enters Group Edit mode:
| |
SHIFT/ADD | Switches to Channel view. | |
CREATE | Creates a new group and enters Group Edit mode (see above). | |
SHIFT/ADD | Switches to Mixer view. | |
SUSPEND | Activates or deactivates the Group Clutch. | |
SHIFT/ADD | Switches to Tracks view. |
The following table outlines the editing controls and their assignments:
Control | Assignment |
---|---|
CAPTURE | — |
SEPARATE | — |
CUT | Cuts the selection (of regions or events). |
COPY | Copies the selection. |
PASTE | Pastes the Clipboard contents. |
DELETE | Deletes the selection. |
The following table outlines the time display controls and their assignments:
Control | Assignment |
---|---|
TIME CODE | Lit if counter is displaying SMPTE time code. |
FEET | Not assigned |
BEATS | Lit if counter is displaying bars/beats/divisions/ticks. |
Time display | Switches between a SMPTE time code or bars/beats/divisions/ticks display. |
RUDE SOLO LIGHT | Flashes if any channel is soloed. |
The following table outlines the numeric keypad controls and their assignments:
Note: A modifier button, such as SHIFT, below a button description indicates that the button has an alternate use while the modifier is held down.
Control | Modifier | Assignment |
---|---|---|
CLR | Deletes current marker. | |
= | Creates a marker at the current playhead position. | |
/ | Equivalent to (but independent of) computer keyboard / key. | |
* | Equivalent to (but independent of) computer keyboard * key. | |
– | Equivalent to (but independent of) computer keyboard – key. | |
+ | Equivalent to (but independent of) computer keyboard + key. | |
0 to 9 |
| |
SHIFT/ADD | Switches to Mixer view, and displays:
| |
EDIT TOOL | Selects tool (if applicable to window with key focus):
| |
0 | If in Go to Marker dialog: equivalent to computer keyboard 0 key. | |
. |
| |
ENTER |
|
The following table outlines the transport controls and their assignments:
Note: A modifier button, such as SHIFT, below a button description indicates that the button has an alternate use while the modifier is held down.
Control | Modifier | Assignment |
---|---|---|
AUDITION | — | |
PRE | Sets left locator (at current playhead position). | |
IN | Sets punch in locator (at current playhead position). | |
OUT | Sets punch out locator (at current playhead position). | |
POST | Sets right locator (at current playhead position). | |
RTZ | Moves playhead to the left locator position. | |
END | Moves playhead to the right locator position. | |
ON LINE | Switches between internal and external sync. | |
LOOP | Enables or disables Cycle mode. | |
QUICK PUNCH | Enables or disables Autopunch mode. | |
REWIND | Shuttles backward. | |
FAST FWD | Shuttles forward. | |
STOP | Stops playback. | |
PLAY | Starts playback. | |
SHIFT/ADD | Pauses playback (or recording). | |
RECORD | Record |
The following table outlines the cursor controls and their assignments:
Note: A modifier button, such as SHIFT, below a button description indicates that the button has an alternate use while the modifier is held down.
Control | Modifier | Assignment |
---|---|---|
Cursor Up |
| |
SHIFT/ADD | Zoom mode: individual track zoom (zooms in). | |
CMD/ALT/FINE | Page up. | |
OPTION/ALL + CMD/ALT/FINE | Scroll to top. | |
Cursor Down |
| |
SHIFT/ADD | Zoom mode: individual track zoom (zooms out). | |
CMD/ALT/FINE | Page down. | |
OPTION/ALL + CMD/ALT/FINE | Scroll to bottom (of window/list with key focus). | |
Cursor Left |
| |
SHIFT/ADD | Zoom mode: individual track zoom reset (of tracks of the same type). | |
CMD/ALT/FINE | Page left. | |
OPTION/ALL + CMD/ALT/FINE | Scroll to left border (of the window with key focus). | |
Cursor Right |
| |
SHIFT/ADD | Zoom mode: individual track zoom reset (of all tracks, regardless of type). | |
CMD/ALT/FINE | Page right. | |
OPTION/ALL + CMD/ALT/FINE | Scroll to right border (of the window with key focus). | |
MODE | Switches between Cursor and Zoom modes. |
The following table outlines the Jog Wheel controls and their assignments:
Control | Assignment |
---|---|
Jog Wheel |
|
SCRUB | Activates or deactivates Scrub mode. |
SHUTTLE | Activates or deactivates Shuttle mode. |