Following is an alphabetical listing of control surfaces directly supported by Logic Pro. The list contains cross-references to the relevant device-specific chapters.
Note: It is possible that your device may be directly supported in Logic Pro via one or more downloadable support files. This is often a driver or plug-in supplied by the manufacturer. (See About Control Surface Plug-ins.) Check the documentation and discs that came with the device, and the manufacturer’s website. Follow any written instructions supplied with the files, if available.
Supported devices | Manufacturer | Notes |
---|---|---|
01V96 | Yamaha | The Yamaha 01V96 emulates two HUI units, using two virtual MIDI In and Out connections over its USB cable. See Yamaha 01V96. |
01X | Yamaha | The Yamaha 01X emulates a Mackie Control. It does not feature all controls available to the Mackie units, however. Refer to the 01X documentation for details. Logic Pro recognizes the 01X as an 01X, and displays a custom icon, but communication is as with a Mackie Control unit. See Mackie Control. |
02R96 | Yamaha | The Yamaha 02R96 emulates three HUI units, using three virtual MIDI In and Out connections over its USB cable. See Yamaha 02R96. |
Baby HUI | Mackie | The Baby HUI is a stripped-down version of the HUI. See Mackie Baby HUI. |
C4 | Mackie | The Mackie C4 is directly supported. See Mackie C4. |
CM408T (System 5-MC) | Euphonix | |
CS-32 MiniDesk | JLCooper | |
DM1000 | Yamaha | The Yamaha DM1000 emulates two HUI units, using two virtual MIDI In and Out connections over its USB cable. See Yamaha DM1000. |
DM2000 | Yamaha | The Yamaha DM2000 emulates three HUI units, using three virtual MIDI In and Out connections over its USB cable. See Yamaha DM2000. |
FaderMaster 4/100 | JLCooper | |
FE-8 | Tascam | Extension unit for FW-1884. See Tascam FW-1884. |
FW-1082 | Tascam | A stripped-down version of the FW-1884. See Tascam FW-1884. |
FW-1884 | Tascam | See Tascam FW-1884. |
HUI | Mackie | See Mackie HUI. |
iControl | M-Audio | See M-Audio iControl. |
KONTROL49 | Korg | A larger version of the microKONTROL. See Korg microKONTROL and KONTROL49. |
Logic Control XT | Mackie/Emagic | This is the extension unit for the Logic Control. It only offers the channel strip section, making it less useful without a Logic (or Mackie) Control. See Mackie Control. |
Logic/Mackie Control | Mackie/Emagic | See Mackie Control for more details. |
Mackie Control | Mackie | The original Mackie Control hardware is similar to the Logic Control. The front panel legend is different, however. You should request a Logic Control Lexan Overlay from Mackie. As Logic Pro also recognizes the Mackie Control protocol, you may use any firmware version. If your unit has firmware version 1.02 or later, you can freely use either the Logic Control or Mackie Control mode. See Mackie Control. |
Mackie Control Extender | Mackie | Mackie-badged version of the Logic Control XT. As Logic Pro also recognizes the Mackie Control protocol, you may use any firmware version. If you have firmware version 1.02 or later, you can freely use either the Logic Control or Mackie Control mode. See Mackie Control. |
Mackie Control Universal | Mackie | A Mackie Control with Logic Control silk screening (legend) and firmware version 2.0 or later (including HUI emulation). As Logic Pro also recognizes the Mackie Control protocol, you may use any firmware version. If you have firmware version 1.02 or later, you can freely use either the Logic Control or Mackie Control mode. See Mackie Control. |
MC | Euphonix | |
MCS3 | JLCooper | See JLCooper MCS3. |
microKONTROL | Korg | |
Motormix | CM Labs | See CM Labs Motormix. |
Radikal Technologies | SAC-2.2 | The SAC-2.2/2k’s native mode is directly supported, but it can also emulate a Mackie Control. You should use the native mode. See Radikal Technologies SAC-2K. |
Radikal Technologies | SAC-2k | |
SI-24 | Roland | See Roland SI-24. |
TranzPort | Frontier Design Group | |
US-224 | Tascam | A stripped-down version of the US-428. See Tascam US-428 and US-224. |
US-2400 | Tascam | Logic Pro supports the US-2400’s native mode. In contrast to its Mackie Control mode, all controls, including the joystick, are supported. See Tascam US-2400. |
US-428 | Tascam |